Radiant Warmers

Neocare Radiant Warmers Are Innovatively Designed For Use In Nursery, Labour & Delivery Suits To Provide Quick & Effective Treatment For The Newborn Infants, Who Suffer Extreme Of Heat Loss. Our Advance Microprocessor Based Controller Is Loaded With A Full Spectrum Of Unique Features To Support The Needs Of Your Most Special Patient.

Neocare Wall Mounting Warmer Is A Simple & Low Cost Warmer, Designed To Use For Short Period & During Procedures I.E. Emergency Resuscitation In Labour Rooms & Operation Theaters As It Requires Minimum Space.

• Easy To Use: As Technology Advanced, We Have Kept The Warmer Simple & Easy To Use With One Touch Controls.
• Focused Heating: The Heater With Reflector Makes It Easier To Work With The Baby By Efficiently Providing Even Heat Distribution Across The Cradle And Not Into The Surrounding Environment.
• Servo Control Mode: Servo Control Is An Electronic Feedback System Which Functions As A Thermostat To Maintain A Constant Temperature At The Site Of Skin Probe By Regulating The Heat Output Of Radiant Warmer. Maintaining A Constant Abdominal Skin Temperature Between 36.5 & 37.0°C Is The Simplest Way To Provide A " Thermoneutral" Environment, Minimizing The No. Of Calories Needed To Maintain Normal Body Temperature & Reducing The Risks Of Cold Stress Or Overheating. Servo Control Is The Only Acceptable Method Of Heat Regulation For The Infant Cared For Under A Radiant Warmer.
• Air Control Mode: Air Control Is An Electronic Feedback System Which Functions As A Thermostat To Maintain A Constant Temperature Of Baby Cradle By Regulating The Heat Output Of Radiant Warmer. It Also Acts As A WATCH DOG As Air Over Temperature Cuts Off Heater Even If The Warmer Is Operating Is Servo Mode.
• Manual Mode: The Manual Mode Allows The Warmer To Be Kept ''Baby Ready'' Without Nuisance Alarms. When Needed The Warmer Provides Safe, Powerful & Controlled Warming To Restore The Temperature Drop Experienced By The Baby Immediately After Delivery.

• Swivelling Warming Source For Taking X - Ray
• Consist Of CERAMIC INFRA RED / SILICON QUARTZ GLASS HEATER
• S.S. Reflector With Safety Grill Designed Such To Achieve Uniform Temperature & Easy Cleaning Without Any Electrical Shock Hazard.
• Examination Lamp With Sufficient Illumination To Access Accurate Infant Colour During Procedures.
• M.S. Fabrication With Powder Coated Paint.

Neocare Radiant Warmers Are Innovatively Designed For Use In Nursery, Labour & Delivery Suits To Provide Quick & Effective Treatment For The Newborn Infants, Who Suffer Extreme Of Heat Loss. Our Advance Microprocessor Based Controller Is Loaded With A Full Spectrum Of Unique Features To Support The Needs Of Your Most Special Patient.

• Easy To Use: As Technology Advanced, We Have Kept The Warmer Simple & Easy To Use With One Touch Controls.
• Focused Heating: The Heater With Reflector Makes It Easier To Work With The Baby By Efficiently Providing Even Heat Distribution Across The Cradle And Not Into The Surrounding Environment.
• Servo Control Mode: Servo Control Is An Electronic Feedback System Which Functions As A Thermostat To Maintain A Constant Temperature At The Site Of Skin Probe By Regulating The Heat Output Of Radiant Warmer. Maintaining A Constant Abdominal Skin Temperature Between 36.5 & 37.0°C Is The Simplest Way To Provide A " Thermoneutral" Environment, Minimizing The No. Of Calories Needed To Maintain Normal Body Temperature & Reducing The Risks Of Cold Stress Or Overheating. Servo Control Is The Only Acceptable Method Of Heat Regulation For The Infant Cared For Under A Radiant Warmer.
• Air Control Mode:Air Control Is An Electronic Feedback System Which Functions As A Thermostat To Maintain A Constant Temperature Of Baby Cradle By Regulating The Heat Output Of Radiant Warmer. It Also Acts As A WATCH DOG As Air Over Temperature Cuts Off Heater Even If The Warmer Is Operating Is Servo Mode.
• Manual Mode: The Manual Mode Allows The Warmer To Be Kept ''Baby Ready'' Without Nuisance Alarms. When Needed The Warmer Provides Safe, Powerful & Controlled Warming To Restore The Temperature Drop Experienced By The Baby Immediately After Delivery.

• Easy Access Of Infant From All Sides With Thick Acrylic Collapsible Side Panels
• Acrylic Baby Tray With Infant''s Head Up / Down Facility & Foam Mattress.
• Provision For Positioning X - Ray Cassette.
• S.S. Tray With Slot To Use Under Surface Photo Therapy.
• Swivelling Warming Source For Taking X - Ray
• Consist Of CERAMIC INFRA RED / SILICON QUARTZ GLASS HEATER
• S.S. Reflector With Safety Grill Designed Such To Achieve Uniform Temperature & Easy Cleaning Without Any Electrical Shock Hazard.
• Instrument Tray, Pole For Infusion Pump & I.V. Stand.
• Examination Lamp With Sufficient Illumination To Access Accurate Infant Colour During Procedures.
• M.S. Fabrication With Powder Coated Paint.
• Mounted On Castors For Easy Mobility.

Neocare Radiant Warmers Are Innovatively Designed For Use In Nursery, Labour & Delivery Suits To Provide Quick & Effective Treatment For The Newborn Infants, Who Suffer Extreme Of Heat Loss. Our Advance Microprocessor Based Controller Is Loaded With A Full Spectrum Of Unique Features To Support The Needs Of Your Most Special Patient.

• Easy To Use: As Technology Advanced, We Have Kept The Warmer Simple & Easy To Use With One Touch Controls.
• Focused Heating: The Heater With Reflector Makes It Easier To Work With The Baby By Efficiently Providing Even Heat Distribution Across The Cradle And Not Into The Surrounding Environment.
• Servo Control Mode: Servo Control Is An Electronic Feedback System Which Functions As A Thermostat To Maintain A Constant Temperature At The Site Of Skin Probe By Regulating The Heat Output Of Radiant Warmer. Maintaining A Constant Abdominal Skin Temperature Between 36.5 & 37.0°C Is The Simplest Way To Provide A " Thermoneutral" Environment, Minimizing The No. Of Calories Needed To Maintain Normal Body Temperature & Reducing The Risks Of Cold Stress Or Overheating. Servo Control Is The Only Acceptable Method Of Heat Regulation For The Infant Cared For Under A Radiant Warmer.
• Air Control Mode: Air Control Is An Electronic Feedback System Which Functions As A Thermostat To Maintain A Constant Temperature Of Baby Cradle By Regulating The Heat Output Of Radiant Warmer. It Also Acts As A WATCH DOG As Air Over Temperature Cuts Off Heater Even If The Warmer Is Operating Is Servo Mode.
• Manual Mode: The Manual Mode Allows The Warmer To Be Kept ''Baby Ready'' Without Nuisance Alarms. When Needed The Warmer Provides Safe, Powerful & Controlled Warming To Restore The Temperature Drop Experienced By The Baby Immediately After Delivery.

• Easy Access Of Infant From All Sides With Thick Acrylic Collapsible Side Panels
• Acrylic Baby Tray With Infant''s Head Up / Down Facility & Foam Mattress.
• Provision For Positioning X - Ray Cassette.
• S.S. Tray With Slot To Use Under Surface Photo Therapy.
• Swivelling Warming Source For Taking X - Ray
• Consist Of CERAMIC INFRA RED / SILICON QUARTZ GLASS HEATER
• S.S. Reflector With Safety Grill Designed Such To Achieve Uniform Temperature & Easy Cleaning Without Any Electrical Shock Hazard.
• Instrument Tray, Pole For Infusion Pump & I.V. Stand.
• Examination Lamp With Sufficient Illumination To Access Accurate Infant Colour During Procedures.
• M.S. Fabrication With Powder Coated Paint.
• Mounted On Castors For Easy Mobility.

Riding on unfathomable volumes of industrial expertise, we are engaged in offering a broad assortment of RMS Mobile X-Ray Machine. 100mA, 100 KVP, X-ray Generator

1st in India of its Kind. Microcontroller Based Design

Soft Touch control Panel

Graphical Color TFT Display

Anatomical programme (120)

Electronic Overload Protection, Error Indication

Stationary Anode X-ray Tube : BEL or Imported

Counter Balanced Mobile Stand

Suitable for Bed Side X-rays